IMIS

Publicaties | Instituten | Personen | Datasets | Projecten | Kaarten
[ meld een fout in dit record ]mandje (0): toevoegen | toon Print deze pagina

Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: three-dimensional and dynamic modeling
Rezaei, A.; Ost, W.; Van Paepegem, W.; De Baets, P.; Degrieck, J. (2011). Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: three-dimensional and dynamic modeling. Wear 270(7-8): 431-438. https://dx.doi.org/10.1016/j.wear.2010.11.005
In: Wear: An International Journal on the Science and Technology of Friction, Lubrication and Wear. Elsevier: Amsterdam. ISSN 0043-1648; e-ISSN 0043-1648, meer
Peer reviewed article  

Beschikbaar in  Auteurs 

Trefwoord
    Marien/Kust
Author keywords
    Composite bearing; Finite element analysis; Friction; Fitting method

Auteurs  Top 

Abstract
    This paper includes the experimental and numerical study of the mechanical behavior of a large scale composite journal bearing, used in marine applications. The bearing is a phenolic based composite with PTFE filler, and is strengthened by polyester fibers. The experiments have been done with a test apparatus which is designed to evaluate the tribological behavior of large-scale composite journal bearings under the oscillating rotation of the shaft. The simulation part of the study mainly focuses on the three-dimensional quasi-static model in which mixed Eulerian–Lagrangian formulation is used to simulate the rotation of the shaft and the contact between the composite bearing and the shaft. Moreover, in order to qualify the quasi-static model, a simplified two-dimensional dynamic model is developed. The experimental and simulation results are in a good agreement and indicate that the quasi-static mixed Eulerian–Lagrangian model is an appropriate method to simulate the sliding contact between the composite journal bearing and oscillating shaft. Further the results show that due to the generation of high hoop stresses in the bearing by the freeze fitting process, this method can extremely decrease the loading capacity of the laminated composite journal bearings compared to adhesive bonding method.

Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid Top | Auteurs