* Sea-Bird SBE19 Data File:
* FileName = C:\SeaBird\casts\VLIZ17052004006.hex
* Software Version 1.24
* Temperature SN = 3078
* Conductivity SN = 3078
* System UpLoad Time = mei 17 2004 16:11:00
* ds
* SEACAT PROFILER V3.1d SN 3078   05/17/04  14:04:54.284
* strain gauge pressure sensor: S/N = 2657401433,  range = 1000 psia,  tc = 377
* clk = 32768.109   iop = 172   vmain = 10.8   vlith = 5.3
* mode = PROFILE  ncasts = 10
* sample rate = 1 scan every 0.5 seconds
* minimum raw conductivity frequency for pump turn on = 3208 hertz
* pump delay = 40 seconds
* samples = 4524   free = 111561   lwait = 0 msec
* SW1 = C8   battery cutoff = 7.3 volts
* number of voltages sampled = 2
* logdata = NO
* S>
* dh
* cast 6  05/17  12:00:27   samples 3055 to 3488 sample rate = 1 scan every 0.5 seconds  stop = switch off
* S>
# nquan = 9
# nvalues = 45
# units = specified
# name 0 = prSM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0mS/cm: Conductivity [mS/cm]
# name 3 = obs: OBS, Backscatterance (D + A) [NTU]
# name 4 = depSM: Depth [salt water, m]
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = flag: flag
# span 0 =      1.008,     23.201
# span 1 =    12.5449,    12.9633
# span 2 =  37.673015,  38.707300
# span 3 =     3.1811,    87.2656
# span 4 =      1.000,     23.000
# span 5 =          2,          5
# span 6 =    31.9096,    32.9736
# span 7 =  1024.0116,  1025.0045
# span 8 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = May 17 2004 12:00:27
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0  temperature, 3078, 17-Oct-03
# sensor 1 = Frequency 1  conductivity, 3078, 17-Oct-03, cpcor = -9.5700e-08
# sensor 2 = Extrnl Volt  0  backscatterance, 1699
# sensor 3 = Pressure Voltage, 2657401433, 21-Oct-03
# datcnv_date = Jul 02 2004 15:03:38, 5.31b
# datcnv_in = S:\ship\ctdcasts\processing\sbe19-3078-0310\3078_040517_780.hex S:\ship\ctdcasts\processing\sbe19-3078-0310\3078_0310.CON
# datcnv_skipover = 0
# filter_date = Jul 02 2004 15:19:59, 5.31b
# filter_in = S:\ship\ctdcasts\processing\sbe19-3078-0310\cnv\3078_040517_780_C.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 2.000
# filter_low_pass_A_vars = c0mS/cm
# filter_low_pass_B_vars = prSM depSM
# alignctd_date = Jul 02 2004 15:47:26, 5.31b
# alignctd_in = S:\ship\ctdcasts\processing\sbe19-3078-0310\cnv\filter\3078_040517_780_CF.cnv
# alignctd_adv = t090C 0.500
# loopedit_date = Jul 02 2004 15:56:28, 5.31b
# loopedit_in = S:\ship\ctdcasts\processing\sbe19-3078-0310\cnv\filter\align\3078_040517_780_CFA.cnv
# loopedit_minVelocity = 0.250
# loopedit_excl_bad_scans = yes
# binavg_date = Jul 02 2004 16:11:41, 5.31b
# binavg_in = S:\ship\ctdcasts\processing\sbe19-3078-0310\cnv\filter\align\loop\3078_040517_780_CFAL.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Jul 02 2004 16:39:45, 5.31b
# Derive_in = S:\ship\ctdcasts\processing\sbe19-3078-0310\cnv\filter\align\loop\bin\3078_040517_780_CFALB.cnv S:\ship\ctdcasts\processing\sbe19-3078-0310\3078_0310.CON
# file_type = ascii