* Sea-Bird SBE 25plus Data File:
* FileName = H:\240318_ICOS-03.hex
* Software Version Seasave V 7.26.7.121
* Temperature SN = 4701
* Conductivity SN = 4388
* System UpLoad Time = Mar 18 2024 21:51:18
* NMEA Latitude = 51 09.26 N
* NMEA Longitude = 001 40.99 E
* NMEA UTC (Time) = Mar 18 2024 20:51:17
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Mar 18 2024 20:51:18
# nquan = 12
# nvalues = 66
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = altM: Altimeter [m]
# name 4 = par: PAR/Irradiance, Biospherical/Licor
# name 5 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 6 = turbWETntu0: Turbidity, WET Labs ECO [NTU]
# name 7 = sal00: Salinity, Practical [PSU]
# name 8 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 9 = density00: Density [density, kg/m^3]
# name 10 = nbin: number of scans per bin
# name 11 = flag: flag
# span 0 =      1.009,     35.309
# span 1 =     9.9347,     9.9492
# span 2 = 3.7879e+04, 3.7988e+04
# span 3 =      -3.00,      -3.00
# span 4 = 2.7212e-04, 2.0815e-02
# span 5 =     2.5936,     3.7430
# span 6 =     0.2691,     0.6388
# span 7 =    34.8441,    34.9306
# span 8 =    1489.43,    1490.14
# span 9 =  1026.8475,  1027.0624
# span 10 =          5,         13
# span 11 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jan 01 2000 20:51:17 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="7" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4701</SerialNumber>
#       <CalibrationDate>31-May-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.39968369e-003</G>
#       <H>6.39620337e-004</H>
#       <I>2.10796531e-005</I>
#       <J>1.77868843e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4388</SerialNumber>
#       <CalibrationDate>09-May-23</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.82232179e+000</G>
#         <H>1.28902612e+000</H>
#         <I>-2.56737489e-003</I>
#         <J>2.40188846e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1160</SerialNumber>
#       <CalibrationDate>08-Jun-22</CalibrationDate>
#       <PA0>1.75846200e-001</PA0>
#       <PA1>3.03594500e-005</PA1>
#       <PA2>-1.69650000e-014</PA2>
#       <PTEMPA0>-5.70674300e+001</PTEMPA0>
#       <PTEMPA1>5.55410700e+001</PTEMPA1>
#       <PTEMPA2>-5.71023800e-001</PTEMPA2>
#       <PTCA0>8.40067100e+006</PTCA0>
#       <PTCA1>5.18951800e+002</PTCA1>
#       <PTCA2>-1.17122300e+001</PTCA2>
#       <PTCB0>2.51927500e+001</PTCB0>
#       <PTCB1>-6.50000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLNTURT-4840</SerialNumber>
#       <CalibrationDate>15 aug 2023</CalibrationDate>
#       <ScaleFactor>189.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.073000</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRT-4840</SerialNumber>
#       <CalibrationDate>15 aug 2023</CalibrationDate>
#       <ScaleFactor>5.20000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0760</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>30.000</ScaleFactor>
#       <Offset>-3.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70483</SerialNumber>
#       <CalibrationDate>29 june 2022</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>9708737864.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.10371396</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Mar 26 2024 13:28:28, 7.26.1.8 [datcnv_vars = 7]
# datcnv_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-240214\4701_240318_icos_03.hex \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4701_240214.xmlcon
# datcnv_skipover = 0
# filter_date = Mar 26 2024 13:28:30, 7.26.1.8
# filter_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-240214\cnv\4701_240318_icos_03_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = prdM
# filter_low_pass_B_vars = t090C c0uS/cm altM par flECO-AFL turbWETntu0
# alignctd_date = Mar 26 2024 13:28:30, 7.26.1.8
# alignctd_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-240214\cnv\filter\4701_240318_icos_03_cf.cnv
# alignctd_adv = c0uS/cm 0.100
# loopedit_date = Mar 26 2024 13:28:31, 7.26.1.8
# loopedit_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-240214\cnv\filter\align\4701_240318_icos_03_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = Mar 26 2024 13:28:31, 7.26.1.8 [derive_vars = 4]
# Derive_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-240214\cnv\filter\align\loop\4701_240318_icos_03_cfal.cnv \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4701_240214.xmlcon
# binavg_date = Mar 26 2024 13:28:31, 7.26.1.8
# binavg_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-240214\cnv\filter\align\loop\derive\4701_240318_icos_03_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii