* Sea-Bird SBE 25plus Data File:
* FileName = H:\180925_435.hex
* Software Version Seasave V 7.26.7.107
* Temperature SN = 4701
* Conductivity SN = 4388
* System UpLoad Time = Sep 25 2018 21:30:29
* NMEA Latitude = 51 34.76 N
* NMEA Longitude = 002 47.39 E
* NMEA UTC (Time) = Sep 25 2018 19:30:08
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Sep 25 2018 19:30:29
# nquan = 15
# nvalues = 53
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = altM: Altimeter [m]
# name 5 = par: PAR/Irradiance, Biospherical/Licor
# name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 7 = depSM: Depth [salt water, m], lat = 51.5793
# name 8 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l], WS = 2
# name 9 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 10 = sal00: Salinity, Practical [PSU]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = density00: Density [density, kg/m^3]
# name 13 = nbin: number of scans per bin
# name 14 = flag: flag
# span 0 =      1.009,     27.239
# span 1 =    17.6494,    17.7221
# span 2 = 4.4300e+04, 4.5097e+04
# span 3 =     0.2771,     1.6373
# span 4 =       3.21,      30.73
# span 5 = -7.580e-02, 1.1588e+00
# span 6 =     1.5447,     2.8219
# span 7 =      1.000,     27.000
# span 8 =     6.1787,     8.2679
# span 9 =     79.766,    106.846
# span 10 =    33.9293,    34.5412
# span 11 =    1513.55,    1514.90
# span 12 =  1024.5419,  1025.1082
# span 13 =          4,         12
# span 14 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Sep 25 2018 19:30:29 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="9" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4701</SerialNumber>
#       <CalibrationDate>13-Feb-18</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.39937544e-003</G>
#       <H>6.38978907e-004</H>
#       <I>2.06382270e-005</I>
#       <J>1.67763955e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4388</SerialNumber>
#       <CalibrationDate>24-Jan-18</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.83550140e+000</G>
#         <H>1.29157626e+000</H>
#         <I>-3.19807245e-003</I>
#         <J>2.74236912e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1160</SerialNumber>
#       <CalibrationDate>5-Jan-18 </CalibrationDate>
#       <PA0>1.69935597e-001</PA0>
#       <PA1>3.03332351e-005</PA1>
#       <PA2>-1.48698243e-014</PA2>
#       <PTEMPA0>-5.70427882e+001</PTEMPA0>
#       <PTEMPA1>5.54596729e+001</PTEMPA1>
#       <PTEMPA2>-5.40267006e-001</PTEMPA2>
#       <PTCA0>8.39865254e+006</PTCA0>
#       <PTCA1>5.03860407e+002</PTCA1>
#       <PTCA2>-1.14266260e+001</PTCA2>
#       <PTCB0>2.51927500e+001</PTCB0>
#       <PTCB1>-6.50000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498-low</SerialNumber>
#       <CalibrationDate>13-06-2018</CalibrationDate>
#       <A0>-1.86250000e-001</A0>
#       <A1>9.87670000e-002</A1>
#       <A2>2.09520000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, OBS, D & A OBS 3+, 2 -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498-high</SerialNumber>
#       <CalibrationDate>13-06-2018</CalibrationDate>
#       <A0>1.52300000e-001</A0>
#       <A1>3.84480000e-001</A1>
#       <A2>4.38980000e-005</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2531</SerialNumber>
#       <CalibrationDate>17-Jan-18</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.1937e-001</Soc>
#         <offset>-0.5170</offset>
#         <A>-4.3054e-003</A>
#         <B> 2.3229e-004</B>
#         <C>-3.2143e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.6800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRT-3599</SerialNumber>
#       <CalibrationDate>140617</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0330</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70483</SerialNumber>
#       <CalibrationDate>16-07-18</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>12033694344.16370000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08367602</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>30.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Sep 28 2018 08:44:57, 7.26.1.8 [datcnv_vars = 8]
# datcnv_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-180921\4701_180925_435.hex \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4701_180921.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# filter_date = Sep 28 2018 08:44:59, 7.26.1.8
# filter_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-180921\cnv\4701_180925_435_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = prdM obs3+ altM par flECO-AFL sbeox0V
# filter_low_pass_B_vars = t090C c0uS/cm
# alignctd_date = Sep 28 2018 08:44:59, 7.26.1.8
# alignctd_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-180921\cnv\filter\4701_180925_435_cf.cnv
# alignctd_adv = c0uS/cm 0.100, sbeox0V 4.000
# loopedit_date = Sep 28 2018 08:44:59, 7.26.1.8
# loopedit_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-180921\cnv\filter\align\4701_180925_435_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = Sep 28 2018 08:45:00, 7.26.1.8 [derive_vars = 6]
# Derive_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-180921\cnv\filter\align\loop\4701_180925_435_cfal.cnv \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4701_180921.xmlcon
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Sep 28 2018 08:45:00, 7.26.1.8
# binavg_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4701-180921\cnv\filter\align\loop\derive\4701_180925_435_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii