* Sea-Bird SBE 25plus Data File:
* FileName = H:\180423-780_2.hex
* Software Version Seasave V 7.26.7.107
* Temperature SN = 4886
* Conductivity SN = 4292
* System UpLoad Time = Apr 23 2018 15:15:57
* NMEA Latitude = 51 28.06 N
* NMEA Longitude = 003 03.41 E
* NMEA UTC (Time) = Apr 23 2018 13:15:27
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Apr 23 2018 13:15:57
# nquan = 9
# nvalues = 12
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = depSM: Depth [salt water, m], lat = 51.4677
# name 4 = sal00: Salinity, Practical [PSU]
# name 5 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 6 = density00: Density [density, kg/m^3]
# name 7 = nbin: number of scans per bin
# name 8 = flag: flag
# span 0 =      1.009,     12.106
# span 1 =    12.2845,    12.4532
# span 2 = 4.1818e+04, 4.2300e+04
# span 3 =      1.000,     12.000
# span 4 =    36.3450,    36.8297
# span 5 =    1499.97,    1500.55
# span 6 =  1027.5508,  1028.0095
# span 7 =          0,         15
# span 8 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Apr 23 2018 13:15:27 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="3" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4886</SerialNumber>
#       <CalibrationDate>30-Nov-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37066385e-003</G>
#       <H>6.40282268e-004</H>
#       <I>2.09763242e-005</I>
#       <J>1.68371437e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4292</SerialNumber>
#       <CalibrationDate>29-Nov-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.81970668e+000</G>
#         <H>1.49669696e+000</H>
#         <I>-2.67705020e-003</I>
#         <J>2.82208870e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1076</SerialNumber>
#       <CalibrationDate>27-Jan-17</CalibrationDate>
#       <PA0>1.30232017e-002</PA0>
#       <PA1>3.06337550e-005</PA1>
#       <PA2>-2.68806680e-014</PA2>
#       <PTEMPA0>-6.51126090e+001</PTEMPA0>
#       <PTEMPA1>5.23641401e+001</PTEMPA1>
#       <PTEMPA2>-4.30358782e-001</PTEMPA2>
#       <PTCA0>8.39298669e+006</PTCA0>
#       <PTCA1>1.55317848e+002</PTCA1>
#       <PTCA2>-4.97978819e+000</PTCA2>
#       <PTCB0>2.49295000e+001</PTCB0>
#       <PTCB1>1.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jun 04 2018 15:25:00, 7.26.1.8 [datcnv_vars = 3]
# datcnv_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-180423\4886_180423_780_2.hex \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4886_180423.XMLCON
# datcnv_skipover = 0
# filter_date = Jun 04 2018 15:25:01, 7.26.1.8
# filter_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-180423\cnv\4886_180423_780_2_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = prdM
# filter_low_pass_B_vars = t090C c0uS/cm
# alignctd_date = Jun 04 2018 15:25:04, 7.26.1.8
# alignctd_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-180423\cnv\filter\4886_180423_780_2_cf.cnv
# alignctd_adv = c0uS/cm 0.100
# loopedit_date = Jun 04 2018 15:25:05, 7.26.1.8
# loopedit_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-180423\cnv\filter\align\4886_180423_780_2_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = Jun 04 2018 15:25:06, 7.26.1.8 [derive_vars = 4]
# Derive_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-180423\cnv\filter\align\loop\4886_180423_780_2_cfal.cnv \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4886_180423.XMLCON
# binavg_date = Jun 04 2018 15:25:06, 7.26.1.8
# binavg_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-180423\cnv\filter\align\loop\derive\4886_180423_780_2_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii