* Sea-Bird SBE 25plus Data File:
* FileName = H:\180329_BRN11.hex
* Software Version Seasave V 7.26.7.107
* Temperature SN = 4886
* Conductivity SN = 4292
* System UpLoad Time = Mar 29 2018 12:31:51
* NMEA Latitude = 51 18.53 N
* NMEA Longitude = 002 36.17 E
* NMEA UTC (Time) = Mar 29 2018 10:31:50
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Mar 29 2018 10:31:51
# nquan = 15
# nvalues = 49
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = altM: Altimeter [m]
# name 5 = par: PAR/Irradiance, Biospherical/Licor
# name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 7 = depSM: Depth [salt water, m], lat = 51.3088
# name 8 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l], WS = 2
# name 9 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 10 = sal00: Salinity, Practical [PSU]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = density00: Density [density, kg/m^3]
# name 13 = nbin: number of scans per bin
# name 14 = flag: flag
# span 0 =      1.009,     25.221
# span 1 =     6.3889,     6.4235
# span 2 = 3.4249e+04, 3.4587e+04
# span 3 =     0.0000,     0.0000
# span 4 =     113.29,     793.31
# span 5 = 2.1178e-01, 7.8282e+02
# span 6 =     1.9335,     5.4232
# span 7 =      1.000,     25.000
# span 8 =     8.7972,     9.8143
# span 9 =     89.855,     99.949
# span 10 =    34.4591,    34.8126
# span 11 =    1475.72,    1476.21
# span 12 =  1027.0889,  1027.3589
# span 13 =          2,         13
# span 14 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jan 01 2000 10:31:50 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="10" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4886</SerialNumber>
#       <CalibrationDate>30-Nov-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37066385e-003</G>
#       <H>6.40282268e-004</H>
#       <I>2.09763242e-005</I>
#       <J>1.68371437e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4292</SerialNumber>
#       <CalibrationDate>29-Nov-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.81970668e+000</G>
#         <H>1.49669696e+000</H>
#         <I>-2.67705020e-003</I>
#         <J>2.82208870e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1076</SerialNumber>
#       <CalibrationDate>27-Jan-17</CalibrationDate>
#       <PA0>1.30232017e-002</PA0>
#       <PA1>3.06337550e-005</PA1>
#       <PA2>-2.68806680e-014</PA2>
#       <PTEMPA0>-6.51126090e+001</PTEMPA0>
#       <PTEMPA1>5.23641401e+001</PTEMPA1>
#       <PTEMPA2>-4.30358782e-001</PTEMPA2>
#       <PTCA0>8.39298669e+006</PTCA0>
#       <PTCA1>1.55317848e+002</PTCA1>
#       <PTCA2>-4.97978819e+000</PTCA2>
#       <PTCB0>2.49295000e+001</PTCB0>
#       <PTCB1>1.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2087</SerialNumber>
#       <CalibrationDate>02-Dec-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.8629e-001</Soc>
#         <offset>-0.5058</offset>
#         <A>-3.1994e-003</A>
#         <B> 1.7048e-004</B>
#         <C>-2.1529e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.2200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>1.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70367</SerialNumber>
#       <CalibrationDate>10-03-2016</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>10683760000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.96444141</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRT-3599</SerialNumber>
#       <CalibrationDate>140617</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0330</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <A0>0.00000000e+000</A0>
#       <A1>0.00000000e+000</A1>
#       <A2>0.00000000e+000</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 6, OBS, D & A OBS 3+, 2 -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <A0>0.00000000e+000</A0>
#       <A1>0.00000000e+000</A1>
#       <A2>0.00000000e+000</A2>
#     </OBS_3plusSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jun 04 2018 14:07:18, 7.26.1.8 [datcnv_vars = 8]
# datcnv_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-bds\4886_180329_brn11.hex \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4886_BDs.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# filter_date = Jun 04 2018 14:07:19, 7.26.1.8
# filter_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-bds\cnv\4886_180329_brn11_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = prdM obs3+ altM par flECO-AFL sbeox0V
# filter_low_pass_B_vars = t090C c0uS/cm
# alignctd_date = Jun 04 2018 14:07:20, 7.26.1.8
# alignctd_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-bds\cnv\filter\4886_180329_brn11_cf.cnv
# alignctd_adv = c0uS/cm 0.100, sbeox0V 4.000
# loopedit_date = Jun 04 2018 14:07:20, 7.26.1.8
# loopedit_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-bds\cnv\filter\align\4886_180329_brn11_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = Jun 04 2018 14:07:20, 7.26.1.8 [derive_vars = 6]
# Derive_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-bds\cnv\filter\align\loop\4886_180329_brn11_cfal.cnv \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\4886_BDs.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jun 04 2018 14:07:21, 7.26.1.8
# binavg_in = \\FS\shared\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-bds\cnv\filter\align\loop\derive\4886_180329_brn11_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii