* Sea-Bird SBE 25plus Data File:
* FileName = H:\20170509_station28.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 4886
* Conductivity SN = 4292
* System UpLoad Time = May 10 2017 13:52:27
* NMEA Latitude = 51 33.25 N
* NMEA Longitude = 001 09.55 E
* NMEA UTC (Time) = May 10 2017  11:52:26
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* Baud rate = 9600
* Using SBE 33 or SBE 36 deck unit.
* CTD BaudConsole = 4800
* Number of voltages exported = 5
* Historic rate = 1
* System UTC = May 10 2017 11:52:27
# nquan = 15
# nvalues = 7
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = altM: Altimeter [m]
# name 5 = par: PAR/Irradiance, Biospherical/Licor
# name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 7 = depSM: Depth [salt water, m], lat = 51.5542
# name 8 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l], WS = 2
# name 9 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 10 = sal00: Salinity, Practical [PSU]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = density00: Density [density, kg/m^3]
# name 13 = nbin: number of scans per bin
# name 14 = flag: flag
# span 0 =      5.044,     11.097
# span 1 =    11.1104,    11.1731
# span 2 = 3.8649e+04, 3.8709e+04
# span 3 =     6.5728,     9.7245
# span 4 =       6.99,      13.24
# span 5 = -3.568e-02, 6.0324e+01
# span 6 =     2.6474,     4.2367
# span 7 =      5.000,     11.000
# span 8 =     9.0867,     9.1208
# span 9 =    102.792,    103.317
# span 10 =    34.4996,    34.5049
# span 11 =    1493.31,    1493.48
# span 12 =  1026.3828,  1026.4165
# span 13 =          0,          8
# span 14 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = May 10 2017 11:52:27 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="8" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4886</SerialNumber>
#       <CalibrationDate>30-Nov-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37066385e-003</G>
#       <H>6.40282268e-004</H>
#       <I>2.09763242e-005</I>
#       <J>1.68371437e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4292</SerialNumber>
#       <CalibrationDate>29-Nov-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.81970668e+000</G>
#         <H>1.49669696e+000</H>
#         <I>-2.67705020e-003</I>
#         <J>2.82208870e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1076</SerialNumber>
#       <CalibrationDate>27-Jan-17</CalibrationDate>
#       <PA0>1.30232017e-002</PA0>
#       <PA1>3.06337550e-005</PA1>
#       <PA2>-2.68806680e-014</PA2>
#       <PTEMPA0>-6.51126090e+001</PTEMPA0>
#       <PTEMPA1>5.23641401e+001</PTEMPA1>
#       <PTEMPA2>-4.30358782e-001</PTEMPA2>
#       <PTCA0>8.39298669e+006</PTCA0>
#       <PTCA1>1.55317848e+002</PTCA1>
#       <PTCA2>-4.97978819e+000</PTCA2>
#       <PTCB0>2.49295000e+001</PTCB0>
#       <PTCB1>1.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2087</SerialNumber>
#       <CalibrationDate>02-Dec-16</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.8629e-001</Soc>
#         <offset>-0.5058</offset>
#         <A>-3.1994e-003</A>
#         <B> 1.7048e-004</B>
#         <C>-2.1529e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.2200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>30.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70367</SerialNumber>
#       <CalibrationDate>10-03-2016</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>10683760000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.96444141</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498_Low</SerialNumber>
#       <CalibrationDate>141028</CalibrationDate>
#       <A0>-7.16920000e-002</A0>
#       <A1>9.61450000e-002</A1>
#       <A2>2.40250000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRT-3599</SerialNumber>
#       <CalibrationDate>140617</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0330</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = May 22 2017 09:05:28, 7.26.6.28 [datcnv_vars = 8]
# datcnv_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-170217\4886_170510_28.hex S:\infra\Data_Zeeleeuw\ctdcasts\4886_170217.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# filter_date = May 22 2017 09:05:29, 7.26.6.28
# filter_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-170217\cnv\4886_170510_28_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 0.100
# filter_low_pass_A_vars = prdM
# filter_low_pass_B_vars = t090C c0uS/cm
# alignctd_date = May 22 2017 09:05:29, 7.26.6.28
# alignctd_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-170217\cnv\filter\4886_170510_28_cf.cnv
# alignctd_adv = c0uS/cm 0.100, sbeox0V 4.000
# loopedit_date = May 22 2017 09:05:29, 7.26.6.28
# loopedit_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-170217\cnv\filter\align\4886_170510_28_cfa.cnv
# loopedit_minVelocity = 0.500
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = May 22 2017 09:05:29, 7.26.6.28 [derive_vars = 6]
# Derive_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-170217\cnv\filter\align\loop\4886_170510_28_cfal.cnv S:\infra\Data_Zeeleeuw\ctdcasts\4886_170217.xmlcon
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = May 22 2017 09:05:29, 7.26.6.28
# binavg_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-170217\cnv\filter\align\loop\derive\4886_170510_28_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*

* Downloaded parameters
* prdM	t090C	c0uS/cm	obs3+	altM	par	flECO-AFL	depSM	sbeox0Mg/L	sbeox0PS	sal00	svCM	density00	nbin	flag	
5.044	11.1650	3.8703e+04	6.5728	13.24	6.0324e+01	2.6474	5.000	9.1004	103.069	34.5049	1493.43	1026.3828	2	0.0000e+00	
6.053	11.1731	3.8709e+04	7.0387	12.20	2.6725e+01	2.6891	6.000	9.1208	103.317	34.5030	1493.48	1026.3844	6	0.0000e+00	
-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	7.000	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	0	-9.990e-29	
-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	8.000	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	-9.990e-29	0	-9.990e-29	
9.479	11.1105	3.8649e+04	9.1268	8.70	5.6308e-01	3.3007	9.000	9.0936	102.870	34.5005	1493.31	1026.4092	1	0.0000e+00	
10.088	11.1108	3.8649e+04	9.2644	8.05	1.1439e-01	4.2367	10.000	9.0867	102.792	34.4996	1493.32	1026.4112	8	0.0000e+00	
11.097	11.1104	3.8650e+04	9.7245	6.99	-3.568e-02	4.1922	11.000	9.0964	102.901	34.5004	1493.34	1026.4165	3	0.0000e+00