* Sea-Bird SBE19plus Data File:
* FileName = C:\SeaBird\casts\vlizapril017.hex
* Software Version 1.24
* Temperature SN =  4126
* Conductivity SN =  4126
* System UpLoad Time = apr 17 2002 15:37:10
* ds
* SeacatPlus V 1.3a  SERIAL NO. 4126    17 Apr 2002  13:32:11
* vbatt = 12.6, vlith =  8.4, ioper =  63.3 ma, ipump =  95.9 ma,
* iext01 =  10.5 ma,
* status = not logging
* number of scans to average = 1
* samples = 29266, free = 616011, casts = 22
* mode = profile, minimum cond freq = 3140, pump delay = 45 sec
* ignore magnetic switch = no
* battery type = ALKALINE, battery cutoff =  7.5 volts
* pressure sensor = strain gauge, range = 508.0
* SBE 38 = no, Gas Tension Device = no
* Ext Volt 0 = yes, Ext Volt 1 = no, Ext Volt 2 = no, Ext Volt 3 = no
* echo commands = yes
* output format = raw HEX
* S>
*
* SeacatPlus V 1.3a  SERIAL NO. 4126    17 Apr 2002  13:32:33
* temperature:  17-nov-01
*     TA0 = 1.221633e-03
*     TA1 = 2.748793e-04
*     TA2 = -2.541250e-06
*     TA3 = 2.789542e-07
*     TOFFSET = 0.000000e+00
* conductivity:  17-nov-01
*     G = -1.005099e+00
*     H = 1.450369e-01
*     I = -4.309264e-04
*     J = 5.281733e-05
*     CF0 = 2.639660e+03
*     CPCOR = -9.570000e-08
*     CTCOR = 3.250000e-06
*     CSLOPE = 1.000000e+00
* pressure S/N = 1242, range = 508 psia:  14-nov-01
*     PA0 = 7.780735e-02
*     PA1 = 1.564780e-03
*     PA2 = 6.661129e-12
*     PTCA0 = 5.271810e+05
*     PTCA1 = -5.965753e+00
*     PTCA2 = 3.864335e-01
*     PTCB0 = 2.503600e+01
*     PTCB1 = 4.000000e-04
*     PTCB2 = 0.000000e+00
*     PTEMPA0 = -6.189846e+01
*     PTEMPA1 = 5.140506e+01
*     PTEMPA2 = 2.059025e-02
*     POFFSET = 0.000000e+00
* volt 0: offset = -4.717667e-02, slope = 1.247662e+00
* volt 1: offset = -4.756333e-02, slope = 1.248813e+00
* volt 2: offset = -4.739000e-02, slope = 1.248598e+00
* volt 3: offset = 0.000000e+00, slope = 1.000000e+00
*     EXTFREQSF = 9.999924e-01
* dh
* cast  17 17 Apr 2002 09:26:20 samples 23164 to 23973, avg = 1, stop = mag switch
* S>
# nquan = 9
# nvalues = 15
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0mS/cm: Conductivity [mS/cm]
# name 3 = obs: OBS, Backscatterance (D + A) [NTU]
# name 4 = depSM: Depth [salt water, m]
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = flag: flag
# span 0 =      1.009,      8.070
# span 1 =     9.2971,     9.4065
# span 2 =  32.950783,  33.554428
# span 3 =     5.2604,    14.3456
# span 4 =      1.000,      8.000
# span 5 =          6,         15
# span 6 =    30.3475,    30.9575
# span 7 =  1023.4306,  1023.9363
# span 8 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Apr 17 2002 09:26:20
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0  temperature, 4126, 17-Nov-01
# sensor 1 = Frequency 1  conductivity, 4126, 17-Nov-01, cpcor = -9.5700e-08
# sensor 2 = Pressure Number
# sensor 3 = Extrnl Volt  0  backscatterance, 1814, 30 Aug 01
# datcnv_date = Mar 23 2004 12:09:30, 5.30a
# datcnv_in = C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\4126_020417_710.hex C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\4126_0201.con
# datcnv_skipover = 0
# filter_date = Mar 23 2004 12:10:38, 5.30a
# filter_in = C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\cnv\4126_020417_710_C.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0mS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Mar 23 2004 12:11:40, 5.30a
# alignctd_in = C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\cnv\filter\4126_020417_710_CF.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Mar 23 2004 12:12:40, 5.30a
# loopedit_in = C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\cnv\filter\align\4126_020417_710_CFA.cnv
# loopedit_minVelocity = 0.250
# loopedit_excl_bad_scans = yes
# binavg_date = Mar 23 2004 12:13:47, 5.30a
# binavg_in = C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\cnv\filter\align\loop\4126_020417_710_CFAL.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Mar 23 2004 12:15:26, 5.30a
# Derive_in = C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\cnv\filter\align\loop\bin\4126_020417_710_CFALB.cnv C:\tjess\ctdcasts\processing\sbe19plus-4126-0201\4126_0201.con
# file_type = ascii
*END*

* Downloaded parameters
* prdM	tv290C	c0mS/cm	obs	depSM	nbin	sal00	density00	flag	
1.009	9.4065	33.278742	7.2632	1.000	6	30.6237	1023.6357	0.0000e+00	
2.017	9.3452	33.554428	6.5051	2.000	9	30.9575	1023.9106	0.0000e+00	
3.026	9.3362	33.544142	6.4418	3.000	9	30.9544	1023.9141	0.0000e+00	
4.035	9.3111	33.521878	8.0225	4.000	11	30.9529	1023.9215	0.0000e+00	
5.044	9.3029	33.512892	9.3534	5.000	14	30.9504	1023.9254	0.0000e+00	
6.053	9.2996	33.509329	11.9497	6.000	9	30.9491	1023.9295	0.0000e+00	
7.061	9.2988	33.507482	11.6448	7.000	12	30.9475	1023.9330	0.0000e+00	
8.070	9.2971	33.504510	14.3456	8.000	8	30.9455	1023.9363	0.0000e+00	
7.061	9.3040	33.507248	14.1634	7.000	10	30.9428	1023.9285	0.0000e+00	
6.053	9.3061	33.512315	7.3300	6.000	10	30.9466	1023.9265	0.0000e+00	
5.044	9.3171	33.483326	5.4937	5.000	14	30.9078	1023.8899	0.0000e+00	
4.035	9.3248	33.298133	5.2604	4.000	10	30.7122	1023.7313	0.0000e+00	
3.026	9.3338	33.059600	5.4274	3.000	15	30.4613	1023.5293	0.0000e+00	
2.017	9.3358	33.004360	5.9508	2.000	13	30.4036	1023.4793	0.0000e+00	
1.009	9.3380	32.950783	6.7159	1.000	15	30.3475	1023.4306	0.0000e+00