* Sea-Bird SBE 19plus V2 Data File:
* FileName = H:\161026_435_gaelle.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 4126
* Conductivity SN = 4126
* System UpLoad Time = Oct 26 2016 23:07:15
* NMEA Latitude = 51 34.90 N
* NMEA Longitude = 002 47.70 E
* NMEA UTC (Time) = Oct 26 2016  21:07:07
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Oct 26 2016 21:07:15
# nquan = 16
# nvalues = 7
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = depSM: Depth [salt water, m]
# name 5 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 6 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 7 = ph: pH
# name 8 = orp: Oxidation Reduction Potential [mV]
# name 9 = altM: Altimeter [m]
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = nbin: number of scans per bin
# name 12 = sal00: Salinity, Practical [PSU]
# name 13 = density00: Density [density, kg/m^3]
# name 14 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 15 = flag: flag
# span 0 =      1.164,      3.795
# span 1 =    15.0994,    15.1573
# span 2 = 3.9964e+04, 4.2258e+04
# span 3 =     0.6592,    42.8569
# span 4 =      1.000,      4.000
# span 5 =     8.3307,    10.8511
# span 6 =     83.684,    132.997
# span 7 =      7.873,      7.877
# span 8 =  -486.4216,  -485.1646
# span 9 =     282.15,     318.38
# span 10 = 1.0000e-12, 1.0000e-12
# span 11 =          2,         11
# span 12 =    32.2385,    34.2742
# span 13 =  1023.8276,  1025.3985
# span 14 =    1503.80,    1506.33
# span 15 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Oct 26 2016 21:07:14 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="9" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>01-Mar-16</CalibrationDate>
#       <A0>1.20351645e-003</A0>
#       <A1>2.81341889e-004</A1>
#       <A2>-3.30853025e-006</A2>
#       <A3>3.09252762e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>01-Mar-16</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00400863e+000</G>
#         <H>1.44821822e-001</H>
#         <I>-4.04076474e-004</I>
#         <J>5.04402264e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>29-Feb-16</CalibrationDate>
#       <PA0>7.96747200e-001</PA0>
#       <PA1>1.56791406e-003</PA1>
#       <PA2>7.98798382e-012</PA2>
#       <PTEMPA0>-6.28069430e+001</PTEMPA0>
#       <PTEMPA1>5.23617187e+001</PTEMPA1>
#       <PTEMPA2>-2.62113084e-001</PTEMPA2>
#       <PTCA0>5.27034626e+005</PTCA0>
#       <PTCA1>3.02417644e+001</PTCA1>
#       <PTCA2>-3.34304391e-001</PTCA2>
#       <PTCB0>2.50360000e+001</PTCB0>
#       <PTCB1>4.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2531</SerialNumber>
#       <CalibrationDate>19-Feb-15</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.1490e-001</Soc>
#         <offset>-0.5270</offset>
#         <A>-4.1191e-003</A>
#         <B> 2.4662e-004</B>
#         <C>-3.5816e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>309299</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>3.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>270255</SerialNumber>
#       <CalibrationDate>161021</CalibrationDate>
#       <Slope>4.6596</Slope>
#       <Offset>2.8857</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Oxidation Reduction Potential -->
#     <OxidationReductionPotentialSensor SensorID="41" >
#       <SerialNumber>255</SerialNumber>
#       <CalibrationDate>14-11-20</CalibrationDate>
#       <B>2.500600</B>
#       <M>-0.494500</M>
#       <Offset>0.0</Offset>
#     </OxidationReductionPotentialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70367</SerialNumber>
#       <CalibrationDate>10-03-2016</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>10683760000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.96444141</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498_Low</SerialNumber>
#       <CalibrationDate>141028</CalibrationDate>
#       <A0>-7.16920000e-002</A0>
#       <A1>9.61450000e-002</A1>
#       <A2>2.40250000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Feb 14 2017 15:19:00, 7.26.1.8 [datcnv_vars = 11]
# datcnv_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-161014\4126_161026_435b.hex S:\infra\Data_Zeeleeuw\ctdcasts\4126_161014.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# filter_date = Feb 14 2017 15:19:00, 7.26.1.8
# filter_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-161014\cnv\4126_161026_435b_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = tv290C c0uS/cm
# filter_low_pass_B_vars = prdM
# alignctd_date = Feb 14 2017 15:19:00, 7.26.1.8
# alignctd_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-161014\cnv\filter\4126_161026_435b_cf.cnv
# alignctd_adv = tv290C 0.500, sbeox0Mg/L 4.000, sbeox0PS 4.000
# loopedit_date = Feb 14 2017 15:19:00, 7.26.1.8
# loopedit_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-161014\cnv\filter\align\4126_161026_435b_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Feb 14 2017 15:19:00, 7.26.1.8
# binavg_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-161014\cnv\filter\align\loop\4126_161026_435b_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Feb 14 2017 15:19:00, 7.26.1.8 [derive_vars = 3]
# Derive_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-161014\cnv\filter\align\loop\bin\4126_161026_435b_cfalb.cnv S:\infra\Data_Zeeleeuw\ctdcasts\4126_161014.xmlcon
# file_type = ascii
*END*

* Downloaded parameters
* prdM	tv290C	c0uS/cm	obs3+	depSM	sbeox0Mg/L	sbeox0PS	ph	orp	altM	par	nbin	sal00	density00	svCM	flag	
1.236	15.1419	4.2221e+04	1.5564	1.000	9.5367	117.095	7.873	-486.3074	318.38	1.0000e-12	6	34.2402	1025.3606	1506.26	0.0000e+00	
2.114	15.1541	4.2216e+04	0.8266	2.000	10.3809	127.269	7.874	-486.4216	307.28	1.0000e-12	5	34.2247	1025.3498	1506.29	0.0000e+00	
2.988	15.1573	4.2228e+04	0.6592	3.000	10.8511	132.997	7.876	-486.3679	295.95	1.0000e-12	5	34.2324	1025.3589	1506.33	0.0000e+00	
3.795	15.1402	4.2258e+04	0.6935	4.000	9.2242	113.098	7.876	-485.9163	282.15	1.0000e-12	11	34.2742	1025.3985	1506.33	0.0000e+00	
2.899	15.1342	4.2249e+04	0.6912	3.000	9.3852	97.702	7.877	-485.3089	291.82	1.0000e-12	6	34.2717	1025.3939	1506.30	0.0000e+00	
1.868	15.1142	4.1780e+04	0.7034	2.000	8.7868	88.727	7.876	-485.4519	303.19	1.0000e-12	5	33.8645	1025.0800	1505.74	0.0000e+00	
1.164	15.0994	3.9964e+04	42.8569	1.000	8.3307	83.684	7.874	-485.1646	311.09	1.0000e-12	2	32.2385	1023.8276	1503.80	0.0000e+00