* Sea-Bird SBE 25plus Data File:
* FileName = H:\150804_340.hex
* Software Version Seasave V 7.23.2
* Temperature SN = 4886
* Conductivity SN = 4292
* System UpLoad Time = Aug 04 2015 12:49:45
* NMEA Latitude = 51 29.60 N
* NMEA Longitude = 002 59.45 E
* NMEA UTC (Time) = Aug 04 2015  10:49:43
* Store Lat/Lon Data = Append to Every Scan
* Real-Time Sample Interval = 0.2500 seconds
* Baud rate = 9600
* Using SBE 33 or SBE 36 deck unit.
* CTD BaudConsole = 4800
* Number of voltages exported = 8
* Historic rate = 1
* System UTC = Aug 04 2015 10:49:45
# nquan = 16
# nvalues = 41
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = altM: Altimeter [m]
# name 5 = par: PAR/Irradiance, Biospherical/Licor
# name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 7 = ph: pH
# name 8 = depSM: Depth [salt water, m], lat = 51.4933
# name 9 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l], WS = 2
# name 10 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 11 = sal00: Salinity, Practical [PSU]
# name 12 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 13 = density00: Density [density, kg/m^3]
# name 14 = nbin: number of scans per bin
# name 15 = flag: flag
# span 0 =      1.009,     21.186
# span 1 =    18.2210,    18.4268
# span 2 = 4.5197e+04, 4.5245e+04
# span 3 =     1.4438,    12.2436
# span 4 =       0.32,      11.92
# span 5 = -2.404e-03, 2.7225e+03
# span 6 =     0.7674,     2.0450
# span 7 =      7.848,      7.925
# span 8 =      1.000,     21.000
# span 9 =     6.0555,     7.1015
# span 10 =     79.073,     92.749
# span 11 =    34.0733,    34.2265
# span 12 =    1515.79,    1516.03
# span 13 =  1024.4703,  1024.7140
# span 14 =          2,         13
# span 15 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Aug 04 2015 10:49:44 [NMEA time, first data scan]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4886</SerialNumber>
#       <CalibrationDate>140711</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37051570e-003</G>
#       <H>6.39992800e-004</H>
#       <I>2.08033378e-005</I>
#       <J>1.65086127e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4292</SerialNumber>
#       <CalibrationDate>140715</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.81309921e+000</G>
#         <H>1.49467731e+000</H>
#         <I>-2.14667307e-003</I>
#         <J>2.37869974e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1076</SerialNumber>
#       <CalibrationDate>140715</CalibrationDate>
#       <PA0>5.49885500e-002</PA0>
#       <PA1>3.06173700e-005</PA1>
#       <PA2>-2.74734800e-014</PA2>
#       <PTEMPA0>-6.56241400e+001</PTEMPA0>
#       <PTEMPA1>5.23273200e+001</PTEMPA1>
#       <PTEMPA2>-3.90000000e-001</PTEMPA2>
#       <PTCA0>8.39038200e+006</PTCA0>
#       <PTCA1>2.16652300e+002</PTCA1>
#       <PTCA2>-6.02778900e+000</PTCA2>
#       <PTCB0>2.49295000e+001</PTCB0>
#       <PTCB1>1.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>270266</SerialNumber>
#       <CalibrationDate>150728</CalibrationDate>
#       <Slope>4.6227</Slope>
#       <Offset>2.6389</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Oxidation Reduction Potential -->
#     <OxidationReductionPotentialSensor SensorID="41" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <B>0.000000</B>
#       <M>0.000000</M>
#       <Offset>0.0</Offset>
#     </OxidationReductionPotentialSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>10-09-2012</CalibrationDate>
#       <ScaleFactor>14.941</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2531</SerialNumber>
#       <CalibrationDate>19-Feb-15</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.1490e-001</Soc>
#         <offset>-0.5270</offset>
#         <A>-4.1191e-003</A>
#         <B> 2.4662e-004</B>
#         <C>-3.5816e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70367</SerialNumber>
#       <CalibrationDate>07-Feb-2014</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>12100000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08532000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498_Low</SerialNumber>
#       <CalibrationDate>141028</CalibrationDate>
#       <A0>-7.16920000e-002</A0>
#       <A1>9.61450000e-002</A1>
#       <A2>2.40250000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 6, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRT-3599</SerialNumber>
#       <CalibrationDate>140617</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0330</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Sep 04 2015 14:30:21, 7.23.2 [datcnv_vars = 9]
# datcnv_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-150714\4886_150804_340.hex S:\infra\Data_Zeeleeuw\ctdcasts\4886_150714.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# filter_date = Sep 04 2015 14:30:21, 7.23.2
# filter_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-150714\cnv\4886_150804_340_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = prdM ph
# filter_low_pass_B_vars =
# alignctd_date = Sep 04 2015 14:30:21, 7.23.2
# alignctd_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-150714\cnv\filter\4886_150804_340_cf.cnv
# alignctd_adv = prdM 0.500, sbeox0V 4.000
# loopedit_date = Sep 04 2015 14:30:21, 7.23.2
# loopedit_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-150714\cnv\filter\align\4886_150804_340_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = Sep 04 2015 14:30:21, 7.23.2 [derive_vars = 6]
# Derive_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-150714\cnv\filter\align\loop\4886_150804_340_cfal.cnv S:\infra\Data_Zeeleeuw\ctdcasts\4886_150714.xmlcon
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Sep 04 2015 14:30:22, 7.23.2
# binavg_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-4886-150714\cnv\filter\align\loop\derive\4886_150804_340_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii