* <SBEDataUploadFile>
*    <ApplicationData>
*       <firmware>
*          <SoftwareVersion>1.0</SoftwareVersion>
*          <BuildDate>Dec  1 2012 10:43:42</BuildDate>
*          </firmware>
*       </ApplicationData>
*    <InstrumentState>
*       <StatusData DeviceType='SBE25plus' SerialNumber='0251076'>
*          <DateTime>2015-03-09T10:09:56</DateTime>
*          <EventSummary numEvents='96'/>
*          <Power>
*             <vBattery>17.6</vBattery>
*             <vExternal>14.4</vExternal>
*             <vLithium>7.3</vLithium>
*             <vRTC>3.1</vRTC>
*             <iExt>22.0</iExt>
*             <iSys>36.6</iSys>
*             <iCPU>10.5</iCPU>
*             </Power>
*          <MemorySummary>
*             <Bytes>213319680</Bytes>
*             <BytesFree>1789165568</BytesFree>
*             <Samples>2962773</Samples>
*             <SamplesFree>24849521</SamplesFree>
*             <Files>0</Files>
*             <CastFiles>0</CastFiles>
*             </MemorySummary>
*          </StatusData>
*       <HardwareData DeviceType='SBE25plus' SerialNumber='0251076'>
*          <Manufacturer>Sea-Bird Electronics, Inc</Manufacturer>
*          <FirmwareVersion>1.0</FirmwareVersion>
*          <FirmwareDate>Dec  1 2012 10:43:42</FirmwareDate>
*          <CommandSetVersion>1.0</CommandSetVersion>
*          <PCBAssembly PCBSerialNum='76951' AssemblyNum='41842C'/>
*          <PCBAssembly PCBSerialNum='76618' AssemblyNum='41843B'/>
*          <MfgDate>2014-07-12T10:36:10</MfgDate>
*          <InternalSensors>
*             <Sensor id='Main Temperature'>
*                <type>temperature-0</type>
*                <SerialNum>03-4886</SerialNum>
*                </Sensor>
*             <Sensor id='Main Conductivity'>
*                <type>conductivity-0</type>
*                <SerialNum>04-4292</SerialNum>
*                </Sensor>
*             <Sensor id='Main Pressure'>
*                <Type>strain-0</Type>
*                <SerialNum>4138675</SerialNum>
*                </Sensor>
*             </InternalSensors>
*          <ExternalSensors>
*             <Sensor id='volt 0'>
*                <Type>CHL</Type>
*                <SerialNum>3599</SerialNum>
*                </Sensor>
*             <Sensor id='volt 1'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='volt 2'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='volt 3'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='volt 4'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='volt 5'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='volt 6'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='volt 7'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='serial 1'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             <Sensor id='serial 2'>
*                <Type>NONE</Type>
*                <SerialNum>NONE</SerialNum>
*                </Sensor>
*             </ExternalSensors>
*          </HardwareData>
*       <ConfigurationData DeviceType='SBE25plus' SerialNumber='0251076'>
*          <Serial>
*             <SerialPort0>
*                <baudconsole>4800</baudconsole>
*                <echoconsole>1</echoconsole>
*                </SerialPort0>
*             <SerialPort1>
*                <enableser1>0</enableser1>
*                <nameser1>ser1</nameser1>
*                <baudser1>9600</baudser1>
*                <inlineser1>1</inlineser1>
*                <promptser1>S></promptser1>
*                <measstringser1>ts</measstringser1>
*                <measintervalser1>0</measintervalser1>
*                <startstringser1>start</startstringser1>
*                <execcharser1>254</execcharser1>
*                <termcharser1>254</termcharser1>
*                <suppressser1>1</suppressser1>
*                <timeoutser1>3</timeoutser1>
*                <failoutser1>60</failoutser1>
*                </SerialPort1>
*             <SerialPort2>
*                <enableser2>0</enableser2>
*                <nameser2>ser2</nameser2>
*                <baudser2>9600</baudser2>
*                <inlineser2>1</inlineser2>
*                <promptser2>S></promptser2>
*                <measstringser2>ts</measstringser2>
*                <measintervalser2>0</measintervalser2>
*                <startstringser2>start</startstringser2>
*                <execcharser2>254</execcharser2>
*                <termcharser2>254</termcharser2>
*                <suppressser2>1</suppressser2>
*                <timeoutser2>3</timeoutser2>
*                <failoutser2>60</failoutser2>
*                </SerialPort2>
*             </Serial>
*          <Settings>
*             <vauxdelay0>0</vauxdelay0>
*             <vauxdelay1>0</vauxdelay1>
*             <vauxdelay2>0</vauxdelay2>
*             <vauxdelay3>0</vauxdelay3>
*             <mincondfreq>3000</mincondfreq>
*             <pumpdelay>60</pumpdelay>
*             <executedtag>1</executedtag>
*             </Settings>
*          <RealTimeOutput>
*             <outputformat>0</outputformat>
*             <historicrate>0</historicrate>
*             <vout0>1</vout0>
*             <vout1>1</vout1>
*             <vout2>1</vout2>
*             <vout3>1</vout3>
*             <vout4>1</vout4>
*             <vout5>1</vout5>
*             <vout6>1</vout6>
*             <vout7>1</vout7>
*             <outputrate>2</outputrate>
*             </RealTimeOutput>
*          </ConfigurationData>
*       <CalibrationCoefficients DeviceType='SBE25plus' SerialNumber='0251076'>
*          <Calibration format='STRAIN0' id='Main Pressure'>
*             <SerialNum>4138675</SerialNum>
*             <Pcaldate>2014-07-15</Pcaldate>
*             <PA0>5.498855e-02</PA0>
*             <PA1>3.061737e-05</PA1>
*             <PA2>-2.747348e-14</PA2>
*             <PTEMPA0>-6.562414e+01</PTEMPA0>
*             <PTEMPA1>5.232732e+01</PTEMPA1>
*             <PTEMPA2>-3.900000e-01</PTEMPA2>
*             <PTCA0>8.390382e+06</PTCA0>
*             <PTCA1>2.166523e+02</PTCA1>
*             <PTCA2>-6.027789e+00</PTCA2>
*             <PTCB0>2.492950e+01</PTCB0>
*             <PTCB1>1.000000e-04</PTCB1>
*             <PTCB2>0.000000e+00</PTCB2>
*             <Poffset>0.000000e+00</Poffset>
*             <Pfullscale>1.600000e+02</Pfullscale>
*             </Calibration>
*          </CalibrationCoefficients>
*       <EventCounter DeviceType='SBE25plus' SerialNumber='0251076'>
*          <EventSummary numEvents='96'/>
*          <Event type='Console Suppress' count='6'/>
*          <Event type='Error16' count='21'/>
*          <Event type='Power On Reset' count='69'/>
*          </EventCounter>
*       </InstrumentState>
*    <InstrumentRawData>
*       <startTime>2015-03-09T10:09:59</startTime>
*       <Data>
# nquan = 15
# nvalues = 11
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = altM: Altimeter [m]
# name 5 = par: PAR/Irradiance, Biospherical/Licor
# name 6 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 7 = depSM: Depth [salt water, m], lat = 51
# name 8 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l], WS = 2
# name 9 = sbeox0PS: Oxygen, SBE 43 [% saturation], WS = 2
# name 10 = sal00: Salinity, Practical [PSU]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = density00: Density [density, kg/m^3]
# name 13 = nbin: number of scans per bin
# name 14 = flag: flag
# span 0 =      1.009,      6.053
# span 1 =     7.0450,     7.1875
# span 2 = 3.4553e+04, 3.4712e+04
# span 3 =     3.4838,     4.8877
# span 4 =       0.27,       4.57
# span 5 = 1.6364e+01, 4.9075e+02
# span 6 =     3.3213,     6.5356
# span 7 =      1.000,      6.000
# span 8 =     7.7702,     9.0249
# span 9 =     80.309,     93.170
# span 10 =    34.1442,    34.3150
# span 11 =    1477.83,    1478.34
# span 12 =  1026.7279,  1026.8764
# span 13 =         17,         58
# span 14 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Mar 09 2015 10:09:59 [Instrument's time stamp, header]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4886</SerialNumber>
#       <CalibrationDate>140711</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37051570e-003</G>
#       <H>6.39992800e-004</H>
#       <I>2.08033378e-005</I>
#       <J>1.65086127e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4292</SerialNumber>
#       <CalibrationDate>140715</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.81309921e+000</G>
#         <H>1.49467731e+000</H>
#         <I>-2.14667307e-003</I>
#         <J>2.37869974e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>1076</SerialNumber>
#       <CalibrationDate>140715</CalibrationDate>
#       <PA0>5.49885500e-002</PA0>
#       <PA1>3.06173700e-005</PA1>
#       <PA2>-2.74734800e-014</PA2>
#       <PTEMPA0>-6.56241400e+001</PTEMPA0>
#       <PTEMPA1>5.23273200e+001</PTEMPA1>
#       <PTEMPA2>-3.90000000e-001</PTEMPA2>
#       <PTCA0>8.39038200e+006</PTCA0>
#       <PTCA1>2.16652300e+002</PTCA1>
#       <PTCA2>-6.02778900e+000</PTCA2>
#       <PTCB0>2.49295000e+001</PTCB0>
#       <PTCB1>1.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Unknown 1, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>10-09-2012</CalibrationDate>
#       <ScaleFactor>14.941</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2087</SerialNumber>
#       <CalibrationDate>07-Feb-14</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.7090e-001</Soc>
#         <offset>-0.5011</offset>
#         <A>-4.0366e-003</A>
#         <B> 2.4423e-004</B>
#         <C>-3.4644e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70367</SerialNumber>
#       <CalibrationDate>07-Feb-2014</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>12100000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08532000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498_Low</SerialNumber>
#       <CalibrationDate>141028</CalibrationDate>
#       <A0>-7.16920000e-002</A0>
#       <A1>9.61450000e-002</A1>
#       <A2>2.40250000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 6, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLRT-3599</SerialNumber>
#       <CalibrationDate>140617</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0330</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jun 30 2015 13:51:11, 7.23.2 [datcnv_vars = 8]
# datcnv_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-1076-1502-nospar-raw\1076_150309_west2.xml S:\infra\Data_Zeeleeuw\ctdcasts\1076_1502_nospar_raw.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# filter_date = Jun 30 2015 13:51:13, 7.23.2
# filter_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-1076-1502-nospar-raw\cnv\1076_150309_west2_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = prdM
# filter_low_pass_B_vars =
# alignctd_date = Jun 30 2015 13:51:13, 7.23.2
# alignctd_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-1076-1502-nospar-raw\cnv\filter\1076_150309_west2_cf.cnv
# alignctd_adv = prdM 0.500, sbeox0V 4.000
# loopedit_date = Jun 30 2015 13:51:14, 7.23.2
# loopedit_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-1076-1502-nospar-raw\cnv\filter\align\1076_150309_west2_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# Derive_date = Jun 30 2015 13:51:14, 7.23.2 [derive_vars = 6]
# Derive_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-1076-1502-nospar-raw\cnv\filter\align\loop\1076_150309_west2_cfal.cnv S:\infra\Data_Zeeleeuw\ctdcasts\1076_1502_nospar_raw.xmlcon
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = yes
# binavg_date = Jun 30 2015 13:51:15, 7.23.2
# binavg_in = S:\infra\Data_Zeeleeuw\ctdcasts\processing\sbe25plus-1076-1502-nospar-raw\cnv\filter\align\loop\derive\1076_150309_west2_cfald.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii