* Sea-Bird SBE 19plus V2 Data File:
* FileName = C:\DATA\20140723_230.hex
* Software Version Seasave V 7.21g
* Temperature SN = 6270
* Conductivity SN = 6270
* System UpLoad Time = Jul 23 2014 09:28:18
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Jul 23 2014 07:28:18
# nquan = 16
# nvalues = 23
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 6 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 7 = altM: Altimeter [m]
# name 8 = par: PAR/Irradiance, Biospherical/Licor
# name 9 = cpar: CPAR/Corrected Irradiance [%]
# name 10 = spar: SPAR/Surface Irradiance
# name 11 = nbin: number of scans per bin
# name 12 = sal00: Salinity, Practical [PSU]
# name 13 = density00: Density [density, kg/m^3]
# name 14 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 15 = flag: flag
# span 0 =      1.008,     12.105
# span 1 =    20.0481,    20.1264
# span 2 = 4.4334e+04, 4.4453e+04
# span 3 =    73.5226,   145.9629
# span 4 =      1.000,     12.000
# span 5 =     5.9889,     6.1137
# span 6 =     79.748,     81.435
# span 7 =       0.58,       8.12
# span 8 = 1.0000e-12, 1.1877e+03
# span 9 = 4.7443e-14, 5.6560e+01
# span 10 = 2.0769e+03, 2.1078e+03
# span 11 =          1,         16
# span 12 =    32.0225,    32.1375
# span 13 =  1022.4670,  1022.6165
# span 14 =    1518.49,    1518.64
# span 15 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jul 23 2014 07:28:18 [System UTC, header]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>17-Jan-14</CalibrationDate>
#       <A0>1.30589000e-003</A0>
#       <A1>2.57319400e-004</A1>
#       <A2>3.14732000e-008</A2>
#       <A3>1.37957300e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>17-Jan-14</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.02320200e+000</G>
#         <H>1.61365100e-001</H>
#         <I>-2.38473200e-004</I>
#         <J>4.49094500e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>16-Jan-14</CalibrationDate>
#       <PA0>2.34454600e-001</PA0>
#       <PA1>4.57468300e-004</PA1>
#       <PA2>-4.72844300e-012</PA2>
#       <PTEMPA0>-6.60605300e+001</PTEMPA0>
#       <PTEMPA1>5.16390500e+001</PTEMPA1>
#       <PTEMPA2>-2.55981100e-001</PTEMPA2>
#       <PTCA0>5.28749800e+005</PTCA0>
#       <PTCA1>3.36935300e+001</PTCA1>
#       <PTCA2>-4.91515800e-001</PTCA2>
#       <PTCB0>2.48028800e+001</PTCB0>
#       <PTCB1>-2.50000000e-005</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70367</SerialNumber>
#       <CalibrationDate>07-Feb-2014</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>12100000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08532000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8738</SerialNumber>
#       <CalibrationDate>04-07-2011</CalibrationDate>
#       <A0>-1.87510000e-001</A0>
#       <A1>3.47640000e-001</A1>
#       <A2>5.26770000e-005</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>255</SerialNumber>
#       <CalibrationDate>18-04-2014</CalibrationDate>
#       <Slope>1.1624</Slope>
#       <Offset>3.0348</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Oxidation Reduction Potential -->
#     <OxidationReductionPotentialSensor SensorID="41" >
#       <SerialNumber>266</SerialNumber>
#       <CalibrationDate>30-01-2013</CalibrationDate>
#       <B>2.499900</B>
#       <M>-0.495000</M>
#       <Offset>0.0</Offset>
#     </OxidationReductionPotentialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>10-09-2012</CalibrationDate>
#       <ScaleFactor>14.941</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2087</SerialNumber>
#       <CalibrationDate>07-Feb-14</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.7090e-001</Soc>
#         <offset>-0.5011</offset>
#         <A>-4.0366e-003</A>
#         <B> 2.4423e-004</B>
#         <C>-3.4644e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>20161</SerialNumber>
#       <CalibrationDate>27-Feb-14</CalibrationDate>
#       <ConversionFactor>1569.75444000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Dec 11 2014 11:39:47, 7.23.2 [datcnv_vars = 11]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-140418\6270_140723_230.hex S:\ship\Data_Zeeleeuw\ctdcasts\6270_140418.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# filter_date = Dec 11 2014 11:39:48, 7.23.2
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-140418\cnv\6270_140723_230_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Dec 11 2014 11:39:48, 7.23.2
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-140418\cnv\filter\6270_140723_230_cf.cnv
# alignctd_adv = tv290C 0.500, sbeox0Mg/L 0.500, sbeox0PS 0.500
# loopedit_date = Dec 11 2014 11:39:48, 7.23.2
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-140418\cnv\filter\align\6270_140723_230_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Dec 11 2014 11:39:48, 7.23.2
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-140418\cnv\filter\align\loop\6270_140723_230_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Dec 11 2014 11:39:48, 7.23.2 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-140418\cnv\filter\align\loop\bin\6270_140723_230_cfalb.cnv S:\ship\Data_Zeeleeuw\ctdcasts\6270_140418.XMLCON
# file_type = ascii