* Sea-Bird SBE 19plus V2 Data File:
* FileName = C:\DATA\raw\24092013_oost.hex
* Software Version Seasave V 7.21g
* Temperature SN = 4126
* Conductivity SN = 4126
* System UpLoad Time = Sep 24 2013 08:55:57
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Sep 24 2013 06:55:57
# nquan = 18
# nvalues = 17
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 6 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 7 = ph: pH
# name 8 = orp: Oxidation Reduction Potential [mV]
# name 9 = altM: Altimeter [m]
# name 10 = par: PAR/Irradiance, Biospherical/Licor
# name 11 = cpar: CPAR/Corrected Irradiance [%]
# name 12 = spar: SPAR/Surface Irradiance
# name 13 = nbin: number of scans per bin
# name 14 = sal00: Salinity, Practical [PSU]
# name 15 = density00: Density [density, Kg/m^3]
# name 16 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 17 = flag: flag
# span 0 =      1.008,      9.078
# span 1 =    15.5829,    15.8848
# span 2 = 4.1733e+04, 4.2766e+04
# span 3 =    38.2543,    79.4153
# span 4 =      1.000,      9.000
# span 5 =    5.34274,    7.91462
# span 6 =   66.31868,   97.58878
# span 7 =      7.880,      7.963
# span 8 =   202.3809,   206.9113
# span 9 =       1.18,      11.00
# span 10 = -2.620e-03, 2.6855e+02
# span 11 = -5.462e-04, 5.5378e+01
# span 12 = 4.7806e+02, 4.8790e+02
# span 13 =          4,         10
# span 14 =    33.4207,    34.0825
# span 15 =  1024.6311,  1025.1062
# span 16 =    1506.69,    1508.49
# span 17 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Sep 24 2013 06:55:57 [System UTC, header]
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>18-Jul-13</CalibrationDate>
#       <A0>1.20350000e-003</A0>
#       <A1>2.81375600e-004</A1>
#       <A2>-3.31520800e-006</A2>
#       <A3>3.09615200e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>18-Jul-13</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00421800e+000</G>
#         <H>1.44765200e-001</H>
#         <I>-3.60198500e-004</I>
#         <J>4.68569800e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>17-Jul-13</CalibrationDate>
#       <PA0>9.87314168e-001</PA0>
#       <PA1>1.56782552e-003</PA1>
#       <PA2>7.65374468e-012</PA2>
#       <PTEMPA0>-6.28590806e+001</PTEMPA0>
#       <PTEMPA1>5.23618887e+001</PTEMPA1>
#       <PTEMPA2>-2.61974756e-001</PTEMPA2>
#       <PTCA0>5.27133816e+005</PTCA0>
#       <PTCA1>2.99149631e+001</PTCA1>
#       <PTCA2>-2.40934424e-001</PTCA2>
#       <PTCB0>2.50360000e+001</PTCB0>
#       <PTCB1>4.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>70483</SerialNumber>
#       <CalibrationDate>14-01-2013</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>11363636363.63640000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.08860999</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8738</SerialNumber>
#       <CalibrationDate>04-07-2011</CalibrationDate>
#       <A0>-1.87510000e-001</A0>
#       <A1>3.47640000e-001</A1>
#       <A2>5.26770000e-005</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>266</SerialNumber>
#       <CalibrationDate>30-01-13</CalibrationDate>
#       <Slope>4.5964</Slope>
#       <Offset>2.5463</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Oxidation Reduction Potential -->
#     <OxidationReductionPotentialSensor SensorID="41" >
#       <SerialNumber>266</SerialNumber>
#       <CalibrationDate>30-01-2013</CalibrationDate>
#       <B>2.499900</B>
#       <M>-0.495000</M>
#       <Offset>0.0</Offset>
#     </OxidationReductionPotentialSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>10-09-2012</CalibrationDate>
#       <ScaleFactor>14.941</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2531</SerialNumber>
#       <CalibrationDate>22-01-2013</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.8590e-001</Soc>
#         <offset>-0.5227</offset>
#         <A>-2.3593e-003</A>
#         <B> 9.2334e-005</B>
#         <C>-9.6470e-007</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 2.4800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>20452</SerialNumber>
#       <CalibrationDate>14-01-2013</CalibrationDate>
#       <ConversionFactor>1612.64822134</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Sep 30 2013 11:19:36, 7.22.4 [datcnv_vars = 13]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-1309\4126_130924_oost1.hex C:\Local Home\EcProjects\CTDproc\4126_1309psa\4126_1309.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# filter_date = Sep 30 2013 11:19:36, 7.22.4
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-1309\cnv\4126_130924_oost1_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm ph orp altM par cpar spar
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Sep 30 2013 11:19:36, 7.22.4
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-1309\cnv\filter\4126_130924_oost1_cf.cnv
# alignctd_adv = tv290C 0.500, sbeox0Mg/L 0.500, sbeox0PS 0.500
# loopedit_date = Sep 30 2013 11:19:37, 7.22.4
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-1309\cnv\filter\align\4126_130924_oost1_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Sep 30 2013 11:19:37, 7.22.4
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-1309\cnv\filter\align\loop\4126_130924_oost1_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Sep 30 2013 11:19:37, 7.22.4 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-4126-1309\cnv\filter\align\loop\bin\4126_130924_oost1_cfalb.cnv C:\Local Home\EcProjects\CTDproc\4126_1309psa\4126_1309.xmlcon
# file_type = ascii