* Sea-Bird SBE 19plus Data File:
* FileName = C:\DATA\raw\120820_710.hex
* Software Version Seasave V 7.21g
* Temperature SN = 4126
* Conductivity SN = 4126
* System UpLoad Time = Aug 20 2012 17:15:15
** Ship: Simon Stevin
** Station: 710
** Operator:
* Real-Time Sample Interval = 0.2500 seconds
* System UTC = Aug 20 2012 15:15:15
# nquan = 12
# nvalues = 20
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs: OBS, Backscatterance (D & A) [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 6 = sbeox0PS: Oxygen, SBE 43 [% saturation]
# name 7 = nbin: number of scans per bin
# name 8 = sal00: Salinity, Practical [PSU]
# name 9 = density00: Density [density, Kg/m^3]
# name 10 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 11 = flag: flag
# span 0 =      1.009,     11.096
# span 1 =    20.3147,    20.3405
# span 2 = 4.5861e+04, 4.5939e+04
# span 3 =    11.2083,    80.7858
# span 4 =      1.000,     11.000
# span 5 =    5.89555,    7.85404
# span 6 =   79.28615,  105.62822
# span 7 =          4,         10
# span 8 =    33.0710,    33.1116
# span 9 =  1023.2126,  1023.2812
# span 10 =    1520.21,    1520.49
# span 11 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Aug 20 2012 15:15:15 [System UTC, header]
# bad_flag = -9.990e-29
# <Sensors count="6" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>04-Feb-12</CalibrationDate>
#       <A0>1.19868900e-003</A0>
#       <A1>2.83174400e-004</A1>
#       <A2>-3.53958300e-006</A2>
#       <A3>3.18932300e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>04-Feb-12</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00366200e+000</G>
#         <H>1.44792800e-001</H>
#         <I>-4.11837300e-004</I>
#         <J>5.12680100e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>03-Feb-12</CalibrationDate>
#       <PA0>8.61844663e-001</PA0>
#       <PA1>1.56756997e-003</PA1>
#       <PA2>8.31477646e-012</PA2>
#       <PTEMPA0>-6.22610975e+001</PTEMPA0>
#       <PTEMPA1>5.14085353e+001</PTEMPA1>
#       <PTEMPA2>1.93681564e-002</PTEMPA2>
#       <PTCA0>5.27069348e+005</PTCA0>
#       <PTCA1>3.07614593e+001</PTCA1>
#       <PTCA2>-2.61132078e-001</PTCA2>
#       <PTCB0>2.50360000e+001</PTCB0>
#       <PTCB1>4.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1807</SerialNumber>
#       <CalibrationDate>12/06/12</CalibrationDate>
#       <ScaleFactor>1.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>2087</SerialNumber>
#       <CalibrationDate>16-jun-12</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.5260e-001</Soc>
#         <offset>-0.4904</offset>
#         <A>-2.3971e-003</A>
#         <B> 1.4353e-004</B>
#         <C>-1.9759e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.6400</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, OBS, Backscatterance (D & A) -->
#     <OBS_DA_3BackscatteranceSensor SensorID="28" >
#       <SerialNumber>1814</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <Gain>400.00</Gain>
#       <Offset>0.000</Offset>
#     </OBS_DA_3BackscatteranceSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 25 2013 13:43:59, 7.22.0 [datcnv_vars = 7]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1202b\4126_120820_710.hex S:\ship\Data_Zeeleeuw\ctdcasts\4126_1202b.xmlcon
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# filter_date = Jan 25 2013 13:43:59, 7.22.0
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1202b\cnv\4126_120820_710_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm sbeox0Mg/L sbeox0PS
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Jan 25 2013 13:43:59, 7.22.0
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1202b\cnv\filter\4126_120820_710_cf.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Jan 25 2013 13:43:59, 7.22.0
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1202b\cnv\filter\align\4126_120820_710_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Jan 25 2013 13:44:00, 7.22.0
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1202b\cnv\filter\align\loop\4126_120820_710_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Jan 25 2013 13:44:00, 7.22.0 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1202b\cnv\filter\align\loop\bin\4126_120820_710_cfalb.cnv S:\ship\Data_Zeeleeuw\ctdcasts\4126_1202b.xmlcon
# file_type = ascii