* Sea-Bird SBE19 Data File:
* FileName = A:\\upload030314002.hex
* Software Version 1.24
* Temperature SN = 3078
* Conductivity SN = 3078
* System UpLoad Time = mrt 14 2003 09:03:03
* ds
* SEACAT PROFILER V3.1d SN 3078   03/14/03  09:09:53.496
* strain gauge pressure sensor: S/N = 2657401433,  range = 1000 psia,  tc = 377
* clk = 32767.773   iop = 175   vmain = 12.4   vlith = 5.2
* mode = PROFILE  ncasts = 26
* sample rate = 1 scan every 0.5 seconds
* minimum raw conductivity frequency for pump turn on = 3208 hertz
* pump delay = 40 seconds
* samples = 14426   free = 101659   lwait = 0 msec
* SW1 = C8   battery cutoff = 7.3 volts
* number of voltages sampled = 2
* logdata = NO
* S>
* dh
* cast 2  03/05  12:44:46   samples 1518 to 2306 sample rate = 1 scan every 0.5 seconds  stop = switch off
* S>
# nquan = 9
# nvalues = 31
# units = specified
# name 0 = prSM: Pressure, Strain Gauge [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = c0mS/cm: Conductivity [mS/cm]
# name 3 = obs: OBS, Backscatterance (D + A) [NTU]
# name 4 = depSM: Depth [salt water, m]
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = flag: flag
# span 0 =      1.009,     16.141
# span 1 =     6.1241,     6.1453
# span 2 =  33.341333,  33.354589
# span 3 =    35.2266,    90.2004
# span 4 =      1.000,     16.000
# span 5 =          0,          5
# span 6 =    33.7026,    33.7255
# span 7 =  1026.5190,  1026.6028
# span 8 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Mar 05 2003 12:44:46
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0  temperature, 3078, 14-Mar-02
# sensor 1 = Frequency 1  conductivity, 3078, 14-Mar-02, cpcor = -9.5700e-08
# sensor 2 = Extrnl Volt  0  backscatterance, 1699
# sensor 3 = Pressure Voltage, 2657401433, 20-Mar-02
# datcnv_date = Jan 22 2004 23:23:06, 5.25
# datcnv_in = C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\3078_030305_115.hex C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\3078_0212VLIZ.con
# datcnv_skipover = 0
# filter_date = Mar 24 2004 11:11:02, 5.30a
# filter_in = C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\cnv\3078_030305_115_C.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 2.000
# filter_low_pass_A_vars = c0mS/cm
# filter_low_pass_B_vars = prSM depSM
# alignctd_date = Mar 24 2004 11:11:35, 5.30a
# alignctd_in = C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\cnv\filter\3078_030305_115_CF.cnv
# alignctd_adv = t090C 0.500
# loopedit_date = Mar 24 2004 11:13:13, 5.30a
# loopedit_in = C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\cnv\filter\align\3078_030305_115_CFA.cnv
# loopedit_minVelocity = 0.250
# loopedit_excl_bad_scans = yes
# binavg_date = Mar 24 2004 11:13:52, 5.30a
# binavg_in = C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\cnv\filter\align\loop\3078_030305_115_CFAL.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Mar 24 2004 11:18:57, 5.30a
# Derive_in = C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\cnv\filter\align\loop\bin\3078_030305_115_CFALB.cnv C:\tjess\ctdcasts\processing\sbe19-3078-0212VLIZ\3078_0212VLIZ.con
# file_type = ascii