* Sea-Bird SBE 19plus V2 Data File:
* FileName = C:\Data\CTDS\110621_145.hex
* Software Version Seasave V 7.20g
* Temperature SN = 6270
* Conductivity SN = 6270
* System UpLoad Time = Jun 21 2011 10:57:22
** Ship:
** Station:
** Operator:
* Real-Time Sample Interval = 0.2500 seconds
# nquan = 10
# nvalues = 14
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity, Practical [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 9 = flag: flag
# span 0 =      1.008,      8.070
# span 1 =    15.8123,    15.8680
# span 2 = 4.3377e+04, 4.3482e+04
# span 3 =     5.8782,   116.7378
# span 4 =      1.000,      8.000
# span 5 =          1,          8
# span 6 =    34.6908,    34.7381
# span 7 =  1025.5647,  1025.6023
# span 8 =    1508.99,    1509.12
# span 9 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jun 21 2011 10:57:22 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="6" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>01-Feb-11</CalibrationDate>
#       <A0>1.31346500e-003</A0>
#       <A1>2.54324100e-004</A1>
#       <A2>4.23633000e-007</A2>
#       <A3>1.20965200e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>01-Feb-11</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.02380900e+000</G>
#         <H>1.61556600e-001</H>
#         <I>-2.89678100e-004</I>
#         <J>4.78673700e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>31-Jan-11</CalibrationDate>
#       <PA0>2.56746500e-001</PA0>
#       <PA1>4.57439000e-004</PA1>
#       <PA2>-4.94457300e-012</PA2>
#       <PTEMPA0>-6.57104100e+001</PTEMPA0>
#       <PTEMPA1>5.16967800e+001</PTEMPA1>
#       <PTEMPA2>-2.84641100e-001</PTEMPA2>
#       <PTCA0>5.28684500e+005</PTCA0>
#       <PTCA1>3.94995700e+001</PTCA1>
#       <PTCA2>-6.07953800e-001</PTCA2>
#       <PTCB0>2.48028750e+001</PTCB0>
#       <PTCB1>-2.50000000e-005</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498</SerialNumber>
#       <CalibrationDate>5-Feb-10</CalibrationDate>
#       <A0>-2.46120000e-001</A0>
#       <A1>8.67380000e-002</A1>
#       <A2>3.08120000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, OBS, D & A OBS 3+, 2 -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498</SerialNumber>
#       <CalibrationDate>5-Feb-10</CalibrationDate>
#       <A0>-1.12330000e+000</A0>
#       <A1>3.52660000e-001</A1>
#       <A2>4.52410000e-005</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1287</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>1.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jul 05 2011 08:57:01, 7.21 [datcnv_vars = 5]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1102b\6270_110621_145.hex S:\ship\Data_Zeeleeuw\ctdcasts\6270_1102b.con
# datcnv_skipover = 0
# filter_date = Jul 05 2011 08:57:01, 7.21
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1102b\cnv\6270_110621_145_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Jul 05 2011 08:57:02, 7.21
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1102b\cnv\filter\6270_110621_145_cf.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Jul 05 2011 08:57:02, 7.21
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1102b\cnv\filter\align\6270_110621_145_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Jul 05 2011 08:57:02, 7.21
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1102b\cnv\filter\align\loop\6270_110621_145_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Jul 05 2011 08:57:02, 7.21 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1102b\cnv\filter\align\loop\bin\6270_110621_145_cfalb.cnv S:\ship\Data_Zeeleeuw\ctdcasts\6270_1102b.con
# file_type = ascii
*END*

* Downloaded parameters
* prdM	tv290C	c0uS/cm	obs3+	depSM	nbin	sal00	density00	svCM	flag	
2.017	15.8680	4.3482e+04	5.8782	2.000	1	34.7381	1025.5852	1509.12	0.0000e+00	
3.026	15.8623	4.3464e+04	6.3955	3.000	7	34.7267	1025.5821	1509.10	0.0000e+00	
4.035	15.8566	4.3453e+04	6.3630	4.000	6	34.7214	1025.5838	1509.09	0.0000e+00	
5.044	15.8433	4.3438e+04	6.4615	5.000	6	34.7193	1025.5897	1509.07	0.0000e+00	
6.053	15.8355	4.3427e+04	6.8422	6.000	7	34.7159	1025.5933	1509.06	0.0000e+00	
7.062	15.8225	4.3417e+04	16.1009	7.000	6	34.7180	1025.6023	1509.04	0.0000e+00	
8.070	15.8123	4.3377e+04	116.7378	8.000	6	34.6908	1025.5882	1508.99	0.0000e+00	
7.062	15.8173	4.3388e+04	23.9227	7.000	7	34.6966	1025.5871	1508.99	0.0000e+00	
6.052	15.8217	4.3408e+04	9.8219	6.000	7	34.7111	1025.5927	1509.01	0.0000e+00	
5.044	15.8238	4.3412e+04	6.9342	5.000	7	34.7132	1025.5894	1509.00	0.0000e+00	
4.035	15.8308	4.3417e+04	6.3979	4.000	6	34.7119	1025.5824	1509.00	0.0000e+00	
3.026	15.8415	4.3426e+04	6.3089	3.000	8	34.7110	1025.5747	1509.02	0.0000e+00	
2.017	15.8433	4.3428e+04	6.4144	2.000	8	34.7116	1025.5703	1509.01	0.0000e+00	
1.008	15.8449	4.3428e+04	6.2304	1.000	4	34.7106	1025.5647	1509.00	0.0000e+00