* Sea-Bird SBE 19plus Data File:
* FileName = C:\Data\CTDS\110117_230.hex
* Software Version Seasave V 7.20g
* Temperature SN = 4126
* Conductivity SN = 4126
* System UpLoad Time = Jan 17 2011 09:58:26
** Ship:
** Station:
** Operator:
* Real-Time Sample Interval = 0.2500 seconds
# nquan = 10
# nvalues = 29
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs: OBS, Backscatterance (D & A) [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity, Practical [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 9 = flag: flag
# span 0 =      1.009,     15.132
# span 1 =     5.9764,     6.0607
# span 2 = 3.2821e+04, 3.3332e+04
# span 3 =    43.9579,    56.4774
# span 4 =      1.000,     15.000
# span 5 =          7,          8
# span 6 =    33.1981,    33.8413
# span 7 =  1026.1260,  1026.7056
# span 8 =    1472.73,    1473.45
# span 9 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jan 17 2011 09:58:26 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="5" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>08-Jul-10</CalibrationDate>
#       <A0>1.20203100e-003</A0>
#       <A1>2.81933900e-004</A1>
#       <A2>-3.38598800e-006</A2>
#       <A3>3.12606400e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>08-Jul-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00291400e+000</G>
#         <H>1.44513400e-001</H>
#         <I>-3.31530300e-004</I>
#         <J>4.48022100e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>4126</SerialNumber>
#       <CalibrationDate>23-Jun-10</CalibrationDate>
#       <PA0>8.18020400e-001</PA0>
#       <PA1>1.56764500e-003</PA1>
#       <PA2>7.85175900e-012</PA2>
#       <PTEMPA0>-6.21068700e+001</PTEMPA0>
#       <PTEMPA1>5.14086500e+001</PTEMPA1>
#       <PTEMPA2>1.93681600e-002</PTEMPA2>
#       <PTCA0>5.27058200e+005</PTCA0>
#       <PTCA1>3.18844400e+001</PTCA1>
#       <PTCA2>-3.06245300e-001</PTCA2>
#       <PTCB0>2.50360000e+001</PTCB0>
#       <PTCB1>4.00000000e-004</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, OBS, Backscatterance (D & A) -->
#     <OBS_DA_3BackscatteranceSensor SensorID="28" >
#       <SerialNumber>1814</SerialNumber>
#       <CalibrationDate>10-Jun-09</CalibrationDate>
#       <Gain>400.00</Gain>
#       <Offset>0.000</Offset>
#     </OBS_DA_3BackscatteranceSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jan 18 2011 16:48:38, 7.21 [datcnv_vars = 5]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1007\4126_110117_230.hex S:\ship\Data_Zeeleeuw\ctdcasts\4126_1007.con
# datcnv_skipover = 0
# filter_date = Jan 18 2011 16:48:39, 7.21
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1007\cnv\4126_110117_230_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Jan 18 2011 16:48:39, 7.21
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1007\cnv\filter\4126_110117_230_cf.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Jan 18 2011 16:48:39, 7.21
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1007\cnv\filter\align\4126_110117_230_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Jan 18 2011 16:48:40, 7.21
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1007\cnv\filter\align\loop\4126_110117_230_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Jan 18 2011 16:48:40, 7.21 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4126-1007\cnv\filter\align\loop\bin\4126_110117_230_cfalb.cnv S:\ship\Data_Zeeleeuw\ctdcasts\4126_1007.con
# file_type = ascii