* Sea-Bird SBE19plus Data File:
* FileName = C:\Documents and Settings\dre\My Documents\uploadJuly2007_3940013.hex
* Software Version 1.50
* Temperature SN =  4930
* Conductivity SN =  4930
* System UpLoad Time = jul 19 2007 15:52:47
* ds
* SeacatPlus V 1.6b  SERIAL NO. 4930    19 Jul 2007  13:48:19
* vbatt = 13.2, vlith =  8.6, ioper =  62.7 ma, ipump =  34.3 ma,
* iext01 =  11.3 ma
* iext23 =  61.5 ma
*
* status = not logging
* number of scans to average = 1
* samples = 11653, free = 547587, casts = 20
* mode = profile, minimum cond freq = 3269, pump delay = 40 sec
* autorun = no, ignore magnetic switch = no
* battery type = alkaline, battery cutoff =  7.3 volts
* pressure sensor = strain gauge, range = 870.0
* SBE 38 = no, Gas Tension Device = no
* Ext Volt 0 = yes, Ext Volt 1 = no, Ext Volt 2 = yes, Ext Volt 3 = no
* echo commands = yes
* output format = raw HEX
* S>
*
* SeacatPlus V 1.6b  SERIAL NO. 4930    19 Jul 2007  13:48:25
* temperature:  17-apr-07
*     TA0 = 1.241429e-03
*     TA1 = 2.595034e-04
*     TA2 = 3.828075e-07
*     TA3 = 1.360573e-07
*     TOFFSET = 0.000000e+00
* conductivity:  17-apr-07
*     G = -9.904987e-01
*     H = 1.292495e-01
*     I = -1.019286e-04
*     J = 2.601129e-05
*     CF0 = 2.769366e+03
*     CPCOR = -9.570000e-08
*     CTCOR = 3.250000e-06
*     CSLOPE = 1.000000e+00
* pressure S/N = 9265, range = 870 psia:  12-apr-07
*     PA0 = 2.321065e-01
*     PA1 = 2.675741e-03
*     PA2 = -4.559422e-12
*     PTCA0 = 5.195273e+05
*     PTCA1 = 2.693733e+00
*     PTCA2 = 8.018583e-02
*     PTCB0 = 2.455475e+01
*     PTCB1 = 1.350000e-03
*     PTCB2 = 0.000000e+00
*     PTEMPA0 = -6.717419e+01
*     PTEMPA1 = 4.967644e+01
*     PTEMPA2 = -7.156059e-02
*     POFFSET = 0.000000e+00
* volt 0: offset = -4.798842e-02, slope = 1.251462e+00
* volt 1: offset = -4.754211e-02, slope = 1.251758e+00
* volt 2: offset = -4.773369e-02, slope = 1.252135e+00
* volt 3: offset = 0.000000e+00, slope = 1.000000e+00
*     EXTFREQSF = 9.999912e-01
* dh
* cast  13 16 Jul 2007 17:27:46 samples 8444 to 9024, avg = 1, stop = mag switch
* S>
# nquan = 10
# nvalues = 43
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs: OBS, Backscatterance (D & A) [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity, Practical [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 9 = flag: flag
# span 0 =      1.009,     22.193
# span 1 =    17.2497,    17.3602
# span 2 = 3.4785e+04, 4.4755e+04
# span 3 =     6.7805,    51.2399
# span 4 =      1.000,     22.000
# span 5 =          3,         11
# span 6 =    26.1798,    34.6278
# span 7 =  1018.7066,  1025.2638
# span 8 =    1503.54,    1513.55
# span 9 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jul 16 2007 17:27:46 [Instrument's time stamp, header]
# bad_flag = -9.990e-29
# <Sensors count="5" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>4930</SerialNumber>
#       <CalibrationDate>22-Jan-06</CalibrationDate>
#       <A0>1.23186900e-003</A0>
#       <A1>2.62966000e-004</A1>
#       <A2>-3.52323200e-008</A2>
#       <A3>1.52896700e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>4930</SerialNumber>
#       <CalibrationDate>22-Jan-06</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.91953900e-001</G>
#         <H>1.29732600e-001</H>
#         <I>-2.26420200e-004</I>
#         <J>3.41629900e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>4930</SerialNumber>
#       <CalibrationDate>23-Jan-06</CalibrationDate>
#       <PA0>8.87028400e-002</PA0>
#       <PA1>2.67287200e-003</PA1>
#       <PA2>-4.99589300e-012</PA2>
#       <PTEMPA0>-6.76035200e+001</PTEMPA0>
#       <PTEMPA1>5.04201300e+001</PTEMPA1>
#       <PTEMPA2>-2.57449700e-001</PTEMPA2>
#       <PTCA0>5.19467200e+005</PTCA0>
#       <PTCA1>-4.02315800e-001</PTCA1>
#       <PTCA2>1.03376800e-001</PTCA2>
#       <PTCB0>2.45547500e+001</PTCB0>
#       <PTCB1>1.35000000e-003</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, OBS, Backscatterance (D & A) -->
#     <OBS_DA_3BackscatteranceSensor SensorID="28" >
#       <SerialNumber>2622</SerialNumber>
#       <CalibrationDate>03/22/05</CalibrationDate>
#       <Gain>400.00</Gain>
#       <Offset>0.000</Offset>
#     </OBS_DA_3BackscatteranceSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>20161</SerialNumber>
#       <CalibrationDate>16/09/04</CalibrationDate>
#       <M>-0.75338455</M>
#       <B>-3.37025135</B>
#       <CalibrationConstant>0.27857496</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>0.00000000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Dec 14 2010 11:09:13, 7.21 [datcnv_vars = 5]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4930-0602\4930_070716_330m.hex S:\ship\Data_Zeeleeuw\ctdcasts\4930_0602.con
# datcnv_skipover = 0
# filter_date = Dec 14 2010 11:09:13, 7.21
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4930-0602\cnv\4930_070716_330m_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Dec 14 2010 11:09:14, 7.21
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4930-0602\cnv\filter\4930_070716_330m_cf.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Dec 14 2010 11:09:14, 7.21
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4930-0602\cnv\filter\align\4930_070716_330m_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Dec 14 2010 11:09:14, 7.21
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4930-0602\cnv\filter\align\loop\4930_070716_330m_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Dec 14 2010 11:09:14, 7.21 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plus-4930-0602\cnv\filter\align\loop\bin\4930_070716_330m_cfalb.cnv S:\ship\Data_Zeeleeuw\ctdcasts\4930_0602.con
# file_type = ascii