* Sea-Bird SBE 19plus V2 Data File:
* FileName = C:\Data\CTDS\101108_w02.hex
* Software Version Seasave V 7.20g
* Temperature SN = 6270
* Conductivity SN = 6270
* System UpLoad Time = Nov 08 2010 08:53:40
** Ship:
** Station:
** Operator:
* Real-Time Sample Interval = 0.2500 seconds
# nquan = 10
# nvalues = 10
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0uS/cm: Conductivity [uS/cm]
# name 3 = obs3+: OBS, D & A 3plus [NTU]
# name 4 = depSM: Depth [salt water, m], lat = 51.00
# name 5 = nbin: number of scans per bin
# name 6 = sal00: Salinity, Practical [PSU]
# name 7 = density00: Density [density, Kg/m^3]
# name 8 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 9 = flag: flag
# span 0 =      2.018,      7.061
# span 1 =    12.2832,    12.3579
# span 2 = 3.8749e+04, 3.8931e+04
# span 3 =    30.3318,    66.5546
# span 4 =      2.000,      7.000
# span 5 =          6,         18
# span 6 =    33.5248,    33.6324
# span 7 =  1025.4124,  1025.4905
# span 8 =    1496.11,    1496.53
# span 9 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Nov 08 2010 08:53:40 [System UpLoad Time]
# bad_flag = -9.990e-29
# <Sensors count="6" >
#   <sensor Channel="1" >
#     <!-- Count, Temperature -->
#     <TemperatureSensor SensorID="58" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>10-Feb-10</CalibrationDate>
#       <A0>1.32478100e-003</A0>
#       <A1>2.50147400e-004</A1>
#       <A2>9.35738500e-007</A2>
#       <A3>1.00101700e-007</A3>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 0, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>10-Feb-10</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.02288100e+000</G>
#         <H>1.61225300e-001</H>
#         <I>-1.94602100e-004</I>
#         <J>3.93277200e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Count, Pressure, Strain Gauge -->
#     <PressureSensor SensorID="46" >
#       <SerialNumber>6270</SerialNumber>
#       <CalibrationDate>05-Feb-10 </CalibrationDate>
#       <PA0>2.66028336e-001</PA0>
#       <PA1>4.57448495e-004</PA1>
#       <PA2>-4.63152652e-012</PA2>
#       <PTEMPA0>-6.55332598e+001</PTEMPA0>
#       <PTEMPA1>5.14299960e+001</PTEMPA1>
#       <PTEMPA2>-1.94711378e-001</PTEMPA2>
#       <PTCA0>5.28719966e+005</PTCA0>
#       <PTCA1>3.93595079e+001</PTCA1>
#       <PTCA2>-5.95910376e-001</PTCA2>
#       <PTCB0>2.48028750e+001</PTCB0>
#       <PTCB1>-2.50000000e-005</PTCB1>
#       <PTCB2>0.00000000e+000</PTCB2>
#       <Offset>0.000000</Offset>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, OBS, D & A OBS 3+ -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498</SerialNumber>
#       <CalibrationDate>5-Feb-10</CalibrationDate>
#       <A0>-2.46120000e-001</A0>
#       <A1>8.67380000e-002</A1>
#       <A2>3.08120000e-006</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, OBS, D & A OBS 3+, 2 -->
#     <OBS_3plusSensor SensorID="63" >
#       <SerialNumber>T8498</SerialNumber>
#       <CalibrationDate>5-Feb-10</CalibrationDate>
#       <A0>-1.12330000e+000</A0>
#       <A1>3.52660000e-001</A1>
#       <A2>4.52410000e-005</A2>
#     </OBS_3plusSensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1207</SerialNumber>
#       <CalibrationDate>12/07/09</CalibrationDate>
#       <ScaleFactor>10.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Nov 26 2010 14:13:42, 7.21 [datcnv_vars = 5]
# datcnv_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1002b\6270_101108_w02.hex S:\ship\Data_Zeeleeuw\ctdcasts\6270_1002b.con
# datcnv_skipover = 0
# filter_date = Nov 26 2010 14:13:43, 7.21
# filter_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1002b\cnv\6270_101108_w02_c.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0uS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Nov 26 2010 14:13:43, 7.21
# alignctd_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1002b\cnv\filter\6270_101108_w02_cf.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Nov 26 2010 14:13:43, 7.21
# loopedit_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1002b\cnv\filter\align\6270_101108_w02_cfa.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = no
# binavg_date = Nov 26 2010 14:13:43, 7.21
# binavg_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1002b\cnv\filter\align\loop\6270_101108_w02_cfal.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Nov 26 2010 14:13:43, 7.21 [derive_vars = 3]
# Derive_in = S:\ship\Data_Zeeleeuw\ctdcasts\processing\sbe19plusv2-6270-1002b\cnv\filter\align\loop\bin\6270_101108_w02_cfalb.cnv S:\ship\Data_Zeeleeuw\ctdcasts\6270_1002b.con
# file_type = ascii