* Sea-Bird SBE 19plus Data File:
* FileName = C:\SeaBird\Casts\060703_130.hex
* Software Version Seasave Win32 V 5.37c
* Temperature SN = 4930
* Conductivity SN = 4930
* System UpLoad Time = Jul 03 2006 11:49:24
** Ship:       Zeeleeuw
** Cruise:     Z06-451
** Station:    130
** Latitude:
** Longitude:
# nquan = 10
# nvalues = 19
# units = specified
# name 0 = prdM: Pressure, Strain Gauge [db]
# name 1 = tv290C: Temperature [ITS-90, deg C]
# name 2 = c0mS/cm: Conductivity [mS/cm]
# name 3 = obs: OBS, Backscatterance (D & A) [NTU]
# name 4 = par: PAR/Irradiance, Biospherical/Licor
# name 5 = depSM: Depth [salt water, m]
# name 6 = nbin: number of scans per bin
# name 7 = sal00: Salinity [PSU]
# name 8 = density00: Density [density, Kg/m^3]
# name 9 = flag: flag
# span 0 =      1.009,     10.088
# span 1 =    19.0427,    20.1627
# span 2 =  30.436269,  42.796616
# span 3 =     6.2212,    18.4529
# span 4 = 1.7624e+00, 2.0989e+00
# span 5 =      1.000,     10.000
# span 6 =          2,          8
# span 7 =    21.4538,    31.5396
# span 8 =  1014.6163,  1022.4078
# span 9 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Jul 03 2006 11:49:24
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0  temperature, 4930, 22-Jan-06
# sensor 1 = Frequency 1  conductivity, 4930, 22-Jan-06, cpcor = -9.5700e-08
# sensor 2 = Pressure Number
# sensor 3 = Extrnl Volt  0  backscatterance, 2622, 03/22/05
# sensor 4 = Extrnl Volt  1  altimeter
# sensor 5 = Extrnl Volt  2  irradiance (PAR), primary, 20161, 16/09/04
# datcnv_date = Jul 17 2006 09:53:47, 5.37d
# datcnv_in = S:\ctdcasts\processing\sbe19plus-4930-0604\4930_060703_130.hex S:\ctdcasts\4930_0604.con
# datcnv_skipover = 0
# filter_date = Jul 17 2006 09:54:40, 5.37d
# filter_in = S:\ctdcasts\processing\sbe19plus-4930-0604\cnv\4930_060703_130_C.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0mS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Jul 17 2006 09:55:28, 5.37d
# alignctd_in = S:\ctdcasts\processing\sbe19plus-4930-0604\cnv\filter\4930_060703_130_CF.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Jul 17 2006 09:56:42, 5.37d
# loopedit_in = S:\ctdcasts\processing\sbe19plus-4930-0604\cnv\filter\align\4930_060703_130_CFA.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = yes
# binavg_date = Jul 17 2006 09:58:03, 5.37d
# binavg_in = S:\ctdcasts\processing\sbe19plus-4930-0604\cnv\filter\align\loop\4930_060703_130_CFAL.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Jul 17 2006 10:12:37, 5.37d
# Derive_in = S:\ctdcasts\processing\sbe19plus-4930-0604\cnv\filter\align\loop\bin\4930_060703_130_CFALB.cnv S:\ctdcasts\4930_0604.con
# file_type = ascii